Quantity:
Total:
Total products:
Total shipping: To be determined
Tax: $0.00
Total:
Kawasaki Triple Transmission Bearing, 92046-010 High Quality roller bearing. Sold as each 92046-010, KT-202513 Applications Kawasaki H1 1969-1975 Kawasaki KH500 1976 Kawasaki H2 1972-1975
Swing arm Needle Bearing Kit Convert your bushing type swing arm to a smoother operating Needle bearing system Kit Includes: Center Shaft 4 Needle Bearings Two Thrust Washers with Bearing
Kawasaki H2 Triple Shift Fork H2 Kawasaki Transmission Gear Shift Fork - Top (T1) 21MM WIDE The material used for the shift fork is AISI 4340 Alloy Steel.The edges are also hardened by high frequency induction / 58-62 HRC AISI 4340 alloy steel is used in power transmission gears and shafts, aircraft landing gear, and other structural parts.It has high...
Kawasaki H2 Triple Shift Fork H2 Shift Fork - LOW (L3) 21MM WIDE The material used for the shift fork is AISI 4340 Alloy Steel.The edges are also hardened by high frequency induction / 58-62 HRC AISI 4340 alloy steel is used in power transmission gears and shafts, aircraft landing gear, and other structural parts.It has high toughness and strength in...
Yamaha RD250, RD350, RD400, R5, DS7 Shift Shaft Reproduction Shift Shaft. Silver Zinc Coated NOTE: The Silver zinc coating may need to be sanded off in the journal areas to allow proper operation.
Transmission Dip Stick & O-Ring Includes the Transmission Dip Stick and the O-Ring Applications: Yamaha RZ350 83-85 Yamaha RD350 YPVS 83-92
Yamaha RD400 E, F, G Shift Shaft Reproduction Shift Shaft Silver zinc coated. NOTE: The Silver zinc coating may need to be sanded off in the journal areas to allow proper operation. Applications 1978, RD400E* ( European E models Use this shaft, the US version do not) 1979 RD400 F Daytona Special 1980 RD4000G
RD400 Engine Mount Damper kit Reproduction Engine mount dampers Total of 8 Pieces Applications Yamaha RD400 1976-1980 Contains the following dampers, 8 total: 1A1-15316-00-00 (4) 1A1-15326-00-00 (2) 1A1-15336-00-00 (2)
Yamaha RD, R5, DS7 Transmission Dip Stick O-ring included. This dip stick is a replacement dip stick, the top looks the same and is like the original. The length of the dip stick is not correct on some applications. You may need to make new marks on the DIp-Stick for the oil level.
Oil Drain Plug / Shifter Tension Bolt Can be used for either a replacement Drain Plug or the Shifter Tension Bolt.
Yamaha Dowel Pin No longer available from Yamaha and used on thousands of Yamaha motorcycles, ATV's, watercraft and Snowmobiles. Made from 303 Stainless Steel so it will not rust like the original Replaces Yamaha PN 91830-22016-00 and 99530-12016-00, 99510-12016-00, 91810-08016-00, 91810-05018-00, 91800-05016-00, Too many applications to list Used on...
Yamaha Counter Shaft Nut (90179-18006-00) Applications: RD 250 RD350, RD400 R5 DS7 1970-1979
